Diethyl phthalate (DEP) is a member of the group of esters of phthalic acid known as phthalates, used ubiquitously as solvents and plasticisers worldwide. DEP can increases the flexibility of plastics. It is also contained in deodorant formulations, perfumes, emollients and insect repellents. It can cross react with dimethyl phtalate.
Diethyl phthalate is a clear, colorless, oily liquid. It is practically odorless, or with a very slight aromatic odor and a bitter, disagreeable taste. It is miscible with ethanol and ethyl ether. Diethyl phthalate is soluble in acetone, benzene, carbon tetrachloride, alcohols, ketones, esters, and aromatic hydrocarbons and partly miscible with aliphatic solvents. Diethyl phthalate, when exposed to heat, decomposes and emits acrid smoke and irritating fumes. It is incompatible with strong oxidisers, strong acids, nitric acid, permanganates, and water and attacks some forms of plastics. Diethyl phthalate is produced in the reaction of phthalic anhydride with ethanol in the presence of concentrated sulphuric acid catalyst.
Clear, colorless, oily liquid with a mild, chemical odor. Bitter taste.
Virtually odorless when pure ("Perfumery
grade" of commercial Diethyl phthalate).
Very bitter taste in weak hydro-alcoholic
solution. Bitter taste perceptible below 20 ppm.
Diethyl phthalate is a Plasticizer for cellulose ester plastic films and sheets; in molded plastics; manufacturing varnishes; cosmetics.
Diethyl phthalate has been used as a substitute for camphor in the manufacture of celluloid, as a solvent for cellulose acetate in the manufacture of varnishes and dopes, as a ftxative for perfumes, and for denaturing ethanol.
Diethyl phthalate is an intermediate of the rodenticides dimouse, murine, and chlorpyrone, and is also an important solvent. Diethyl phthalate is used as a plasticizer for plastics. Diethyl phthalate is used as an analytical reagent, a gas chromatography stationary solution, a solvent for cellulose and esters, a plasticizer and a lubricant. Diethyl phthalate is used as plasticizer, solvent, lubricant, fixative, foaming agent for colored or rare metal mine flotation, gas chromatography fixative, alcohol denaturant, spray insecticide. This product is mixed with cellulose acetate, cellulose acetate butyrate, polyvinyl acetate, nitrocellulose, ethyl cellulose, polymethyl methacrylate, polystyrene, polyvinyl butyral, vinyl chloride-vinyl acetate Most resins such as copolymers have good compatibility. It is mainly used as a plasticizer for cellulose resin, but the product has high volatility, which limits its wide application.
Diethyl phthalate is produced by the reaction of phthalic anhydride with ethanol in the presence of sulfuric acid.
ChEBI: The diethyl ester of benzene-1,2-dicarboxylic acid.
A clear, colorless liquid without significant odor. More dense than water and insoluble in water. Hence sinks in water. Primary hazard is to the environment. Spread to the environment should be immediately stopped. Easily penetrates soil, contaminates groundwater and nearby waterways. Flash point 325°F. Severely irritates eyes and mildly irritates skin. Used in the manufacture of perfumes, plastics, mosquito repellents and many other products.
Diethyl phthalate is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. Can generate electrostatic charges. [Handling Chemicals Safely 1980. p. 250].
Diethyl phthalate exhibited low to very lowacute toxicity in laboratory animals. Inges tion produced somnolence and hypotension.Inhalation of its vapors may result in lacrima tion, coughing, and irritation of the throatin humans. The oral LD50 value in mice is6170 mg/kg. Diethyl phthalate administeredto pregnant rats at 5% concentration in thefeed showed no adverse effect upon embryoor fetal growth, viability, or the incidence ofmalformations (Price et al. 1988).
Special Hazards of Combustion Products: Irritating vapors of unburned chemical may form in fire.
Flammability and Explosibility
Non flammable
Pharmaceutical Applications
Diethyl phthalate is used as a plasticizer for film coatings on tablets, beads, and granules at concentrations of 10–30% by weight of polymer.
Diethyl phthalate is also used as an alcohol denaturant and as a solvent for cellulose acetate in the manufacture of varnishes and dopes. In perfumery, diethyl phthalate is used as a perfume fixative at a concentration of 0.1–0.5% of the weight of the perfume used.
This plasticizer increases the fexibility of plastics. It is
also contained in deodorant formulations, perfumes,
emollients, and insect repellents. It can cross-react
with dimethyl phthalate.
Poison by intravenous
route. Moderately toxic by ingestion,
subcutaneous, and intraperitoneal routes. Human systemic effects by inhalation:
lachrymation, respiratory obstruction, and
other unspecified respiratory system effects.
An eye irritant and systemic irritant by
inhalation. An experimental teratogen.
Other experimental reproductive effects.
Narcotic in hgh concentrations.
Combustible when exposed to heat or
flame. To fight fire, use water spray, mist,
foam. When heated to decomposition it
emits acrid smoke and irritating fumes.
Diethyl phthalate is used in oral pharmaceutical formulations and is generally regarded as a nontoxic and nonirritant material at the levels employed as an excipient. However, if consumed in large quantities it can act as a narcotic and cause paralysis of the central nervous system.
Although some animal studies have suggested that high concentrations of diethyl phthalate may be teratogenic, other studies have shown no adverse effects.
LD50 (guinea pig, oral): 8.6g/kg
LD50 (mouse, IP): 2.7g/kg
LD50 (mouse, oral): 6.2g/kg
LD50 (rat, IP): 5.1g/kg
LD50 (rat, oral): 8.6g/kg
Tumorigen,Mutagen; Reproductive Effector; Human Data; PrimaryIrritant. This material is used as a plasticizer, dye carrier,and wetting agent; as a solvent for cellulose esters; as avehicle in pesticidal sprays; as a fixative and solvent in perfumery; as an alcohol denaturant; and as a plasticizer insolid rocket propellants.
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit.
Leaching from PVC piping in contact with water (quoted, Verschueren, 1983).
Biological. A proposed microbial degradation mechanism is as follows: 4-hydroxy-3-
methylbenzyl alcohol to 4-hydroxy-3-methylbenzaldehyde to 3-methyl-4-hydroxybenzoic acid to
4-hydroxyisophthalic acid to protocatechuic acid to β-ketoadipic acid (Chapman, 1972). In
anaerobic sludge, diethyl phthalate degraded as follows: monoethyl phthalate to phthalic acid to
protocatechuic acid followed by ring cleavage and mineralization (Shelton et al., 1984).
Photolytic. An aqueous solution containing titanium dioxide and subjected to UV radiation (λ
>290 nm) produced hydroxyphthalates and dihydroxyphthalates as intermediates (Hustert and
Moza, 1988).
Chemical/Physical. Under alkaline conditions, diethyl phthalate will initially hydrolyze to ethyl
hydrogen phthalate and ethanol. The monoester will undergo hydrolysis forming o-phthalic acid
and ethanol (Kollig, 1993). A second-order rate constant of 2.5 x 10-2/Msec was reported for the
hydrolysis of diethyl phthalate at 30 °C and pH 8 (Wolfe et al., 1980). At 30 °C, hydrolysis halflives
of 8.8 and 18 yr were reported at pH values 9 and 10-12, respectively (Callahan et al., 1979).
Diethyl phthalate is stable when stored in a well-closed container in a cool, dry place.
The name of this material is not on the DOT listof materials for label and packaging standards. However,based on regulations, it may be classified as anEnvironmentally hazardous substances, liquid, n.o.s. It fallsin Hazard Class 9 and Packing Group III.[20,21]
Wash the ester with aqueous Na2CO3, then distilled water, dry (CaCl2), and distil it under reduced pressure. Store it in a vacuum desiccator over P2O5. [Beilstein 9 IV 3172.]
Incompatible with strong oxidizing materials, acids, and permanganates.
The current ITSL for diethyl phthalate is 2800 μg/m3, with annual averaging time (AT).
Included in the FDA Inactive Ingredients Database (oral capsules, delayed action, enteric coated, and sustained action tablets). Included in nonparenteral medicines licensed in the UK. Included in the Canadian List of Acceptable Non-medicinal Ingredients.
