Ethyl butyl ether is a colorless liquid.Molecular weight = 102.21; Boiling point = 92℃;Freezing/Melting point = - 124℃; Flash point = 4℃.Hazard Identification (based on NFPA-704 M RatingSystem): Health 2, Flammability 3, Reactivity 0. Slightlysoluble in water.
Ethyl butyl ether is a colorless liquid
Extraction solvent, inert reaction medium.
A clear colorless liquid with an ethereal odor. Flash point 40°F. Less dense than water. Vapors heavier than air.
Highly flammable. Slightly soluble in water. Oxidizes readily in air to form unstable peroxides that may explode spontaneously [Bretherick 1979. p.151-154, 164]. A mixture of liquid air and diethyl ether exploded spontaneously [MCA Case History 616. 1960].
Ethers, such as Butyl ethyl ether, can act as bases. They form salts with strong acids and addition complexes with Lewis acids. The complex between diethyl ether and boron trifluoride is an example. Ethers may react violently with strong oxidizing agents. In other reactions, which typically involve the breaking of the carbon-oxygen bond, ethers are relatively inert.
Flammable, dangerous fire risk.
Inhalation or contact with material may irritate or burn skin and eyes. Fire may produce irritating, corrosive and/or toxic gases. Vapors may cause dizziness or suffocation. Runoff from fire control may cause pollution.
HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water.
Flammability and Explosibility
Flammable
Moderately toxic by
ingestion. A skin and eye irritant. A very
dangerous fire hazard when exposed to heat
or flame; can react vigorously with oxidizing
materials. Keep away from heat and open
flame. To fight fire, use alcohol foam, CO2,
dry chemical. When heated to
decomposition it emits acrid smoke and
irritating fumes. See also ETHERS.
Used as a solvent for extraction and in
making other chemicals
If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek medical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, including resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medical attention. Give large quantities of water and inducevomiting. Do not make an unconscious person vomit
Color Code—Red: Flammability Hazard: Store ina flammable liquid storage area or approved cabinet awayfrom ignition sources and corrosive and reactive materials.Prior to working with this chemical you should be trainedon its proper handling and storage. Store in tightly closedcontainers in a cool, well-ventilated area away from oxidizers, heat, and sources of ignition. Where possible, automatically pump liquid from drums or other storage containersto process containers. Drums must be equipped with selfclosing valves, pressure vacuum bungs, and flame arresters.Use only nonsparking tools and equipment, especially whenopening and closing containers of this chemical. Sources ofignition, such as smoking and open flames, are prohibitedwhere this chemical is used, handled, or stored in a mannerthat could create a potential fire or explosion hazard.Wherever this chemical is used, handled, manufactured, orstored, use explosion-proof electrical equipment andfittings.
UN1179 Ethyl butyl ether, Hazard Class: 3;
Labels: 3-Flammable liquid.
Purify by drying with CaSO4, by passage through a column of activated alumina (to remove peroxides), followed by prolonged refluxing with Na and then fractional distillation. [Beilstein 4 IV 1518.]
May form explosive mixture with air.
Heat or prolonged storage may cause the formation of unstable peroxides. Incompatible with oxidizers (chlorates,
nitrates, peroxides, permanganates, perchlorates, chlorine,
bromine, fluorine, etc.); contact may cause fires or explosions. Keep away from alkaline materials, strong bases,
strong acids, oxoacids, and epoxides. Attacks some plastics,
rubber and coatings. May accumulate static electrical
charges, and may cause ignition of its vapors.
Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber. All federal,
state, and local environmental regulations must be
observed. Consult with environmental regulatory agencies
for guidance on acceptable disposal practices. Generators
of waste containing this contaminant (≥100 kg/mo) must
conform with EPA regulations governing storage, transportation, treatment, and waste disposal.
