2-[(Diphenylmethyl)Thio]Acetamide NEW

2-[(Diphenylmethyl)Thio]Acetamide

Modify Date: 2024-01-04 16:22:56

2-[(Diphenylmethyl)Thio]Acetamide structure	Common Name	2-[(Diphenylmethyl)Thio]Acetamide
	CAS Number	68524-30-1	Molecular Weight	257.351
	Density	1.2±0.1 g/cm3	Boiling Point	427.7±33.0 °C at 760 mmHg
	Molecular Formula	C15H15NOS	Melting Point	N/A
	MSDS	N/A	Flash Point	212.5±25.4 °C
	Symbol	GHS07, GHS09	Signal Word	Warning

Purity		Quantity		Budget		Inquiry

• Properties

• Spectrum

---

 Names

Name	2-[(Diphenylmethyl)Thio]Acetamide
Synonym	More Synonyms

 Chemical & Physical Properties

Density	1.2±0.1 g/cm3
Boiling Point	427.7±33.0 °C at 760 mmHg
Molecular Formula	C15H15NOS
Molecular Weight	257.351
Flash Point	212.5±25.4 °C
Exact Mass	257.087433
PSA	68.39000
LogP	3.20
Vapour Pressure	0.0±1.0 mmHg at 25°C
Index of Refraction	1.620

 MSDS

Material Safety Data Sheet Section1. Identification of the substance Product Name: 2-[(Diphenylmethyl)thio]acetamide Synonyms: Section2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. Section3. Composition/information on ingredients. Ingredient name:2-[(Diphenylmethyl)thio]acetamide CAS number:68524-30-1 Section4. First aid measures Skin contact:Immediately wash skin with copious amounts of water for at least 15 minutes while removing contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact:Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation:Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Ingestion:Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Section5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution:Wear approved mask/respirator Hand precaution:Wear suitable gloves/gauntlets Skin protection:Wear suitable protective clothing Eye protection:Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section7. Handling and storage Handling:This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Store in closed vessels. Storage: Section8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section9. Physical and chemical properties Appearance:Not specified Boiling point:No data No data Melting point: Flash point:No data Density:No data Molecular formula:C15H15NOS Molecular weight:257.4 Section10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, sulfur oxides. Section11. Toxicological information No data. Section12. Ecological information No data. Section13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section14. Transportation information Non-harzardous for air and ground transportation. Section15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313. SECTION 16 - ADDITIONAL INFORMATION N/A

 Safety Information

Symbol	GHS07, GHS09
Signal Word	Warning
Hazard Statements	H302-H410
Precautionary Statements	P273-P501
Hazard Codes	Xn,N
Risk Phrases	22-50/53
Safety Phrases	60-61
RIDADR	UN 3077 9 / PGIII
HS Code	2930909090

 Synthetic Route

Previous 1/5 Next

benzhydryl chlo... 90-99-3 2-Chloroacetami... 79-07-2 ~99% 2-[(Diphenylmet... 68524-30-1

Literature: PROCOS S.P.A. Patent: US2004/106829 A1, 2004 ; Location in patent: Page 3 ;

Triethylamine 121-44-8 benzhydryl chlo... 90-99-3 2-Chloroacetami... 79-07-2 ~82% 2-[(Diphenylmet... 68524-30-1

Literature: PROCOS S.P.A. Patent: US2004/106829 A1, 2004 ; Location in patent: Page 3 ;

2-benzhydrylsul... 68524-29-8 ~98% 2-[(Diphenylmet... 68524-30-1

Literature: Olivo, Horacio F.; Osorio-Lozada, Antonio; Peeples, Tonya L. Tetrahedron Asymmetry, 2005 , vol. 16, # 21 p. 3507 - 3511

 Precursor & DownStream

Precursor  10	Previous 1/3 Next
CAS#:90-99-3 benzhydryl chloride  CAS#:79-07-2 2-Chloroacetamide  CAS#:121-44-8 Triethylamine  CAS#:68524-29-8 2-benzhydrylsul...
DownStream  3
CAS#:112111-43-0 armodafinil  CAS#:63547-24-0 2-(Benzhydrylsu...  CAS#:6266-48-4 2,4,6-tribenzhy...

 Customs

HS Code	2930909090
Summary	2930909090. other organo-sulphur compounds. VAT:17.0%. Tax rebate rate:13.0%. . MFN tariff:6.5%. General tariff:30.0%

Company Profile

    Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions.

Our Company

Our Advantage

Quality control

Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.

Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.

Technological innovation

Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.

Competitiveness

Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.

Word of mouth

Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.

Rich experience

Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.

Safe and fast delivery

We will arrange shipment of spot products as soon as we receive payment.

Customized products are determined based on the synthesis time of different products.

Excellent pre-sales and after-sales service

Pre sales:

We are committed to providing the most favorable quotes and detailed information about our products and company.

After-sale service:

We assist buyers in customs clearance by providing necessary documents and information.

If there is any dispute over product quality, we are committed to providing the best solution.

Our packaging and shipping

• Packaging: 

1kg/bag or bottle, 25kg/drum, 50kg/drum, 200L/drum, 1T/bag or IBC drum, standard export packaging or packaging required by customers.

• Shipping

• Delivery:

Within 7 days after receiving your payment

Contact information

For more details, pls contact us freely.

Name: Elin

Email: jiuyitime@fdachem.com

 Sincerely hope to establish friendly business relationships with new and old customers, and jointly create a beautiful future for the fine chemical industry!