1/2
Butyl acrylate resin NEW
- Min. Order1KG
- Purity99%
- Cas No9003-49-0
- Supply Abilityg-kg-tons, free sample is available
- Update time2025-10-13
| Product Name | Butyl acrylate resin |
| CAS No | 9003-49-0 |
| EC-No | |
| Min. Order | 1KG |
| Purity | 99% |
| Supply Ability | g-kg-tons, free sample is available |
| Release date | 2025/10/13 |
Butyl acrylate resin
![]() Butyl acrylate resin structure | Common Name | Butyl acrylate resin | ||
|---|---|---|---|---|
| CAS Number | 9003-49-0 | Molecular Weight | 128.16900 | |
| Density | 1.087 g/mL at 25 °C | Boiling Point | N/A | |
| Molecular Formula | C7H12O2 | Melting Point | N/A | |
| MSDS | USA | Flash Point | 40 °F | |
| Symbol | ![]() GHS02, GHS07, GHS08 | Signal Word | Danger | |
| Purity | Quantity | Budget | Inquiry |
|---|
Properties
Spectrum
Names
| Name | poly(butyl acrylate) macromolecule |
|---|---|
| Synonym | More Synonyms |
Chemical & Physical Properties
| Density | 1.087 g/mL at 25 °C |
|---|---|
| Molecular Formula | C7H12O2 |
| Molecular Weight | 128.16900 |
| Flash Point | 40 °F |
| Exact Mass | 128.08400 |
| PSA | 26.30000 |
| LogP | 1.51570 |
| Vapour density | 1.2 (37 °C, vs air) |
| Index of Refraction | n20/D 1.466(lit.) |
MSDS
Section1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE Product identifiers Product name: Poly(butyl acrylate) solution Relevant identified uses of the substance or mixture and uses advised against Identified uses: Laboratory chemicals, Manufacture of substances Section2. HAZARDS IDENTIFICATION Classification of the substance or mixture Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP] Flammable liquids (Category 2) Skin irritation (Category 2) Reproductive toxicity (Category 2) Specific target organ toxicity - single exposure (Category 3) Specific target organ toxicity - repeated exposure (Category 2) Aspiration hazard (Category 1) Classification according to EU Directives 67/548/EEC or 1999/45/EC Highly flammable. Harmful: may cause lung damage if swallowed. Harmful: danger of serious damage to health by prolonged exposure through inhalation. Possible risk of harm to the unborn child. Irritating to skin. Vapours may cause drowsiness and dizziness. Label elements Labelling according Regulation (EC) No 1272/2008 [CLP] Pictogram Signal wordDanger Hazard statement(s) H225Highly flammable liquid and vapour. H304May be fatal if swallowed and enters airways. H315Causes skin irritation. H336May cause drowsiness or dizziness. H361dSuspected of damaging the unborn child. H373May cause damage to organs through prolonged or repeated exposure. Precautionary statement(s) P210Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P261Avoid breathing vapours. P281Use personal protective equipment as required. P301 + P310IF SWALLOWED: Immediately call a POISON CENTER or doctor/ physician. P331Do NOT induce vomiting. Supplemental Hazardnone Statements According to European Directive 67/548/EEC as amended. Hazard symbol(s) R-phrase(s) R11Highly flammable. R38Irritating to skin. R48/20Harmful: danger of serious damage to health by prolonged exposure through inhalation. R63Possible risk of harm to the unborn child. R65Harmful: may cause lung damage if swallowed. R67Vapours may cause drowsiness and dizziness. S-phrase(s) S16Keep away from sources of ignition - No smoking. S36/37Wear suitable protective clothing and gloves. S62If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label. Other hazards - none Section3. COMPOSITION/INFORMATION ON INGREDIENTS Mixtures ComponentClassificationConcentration Toluene CAS-No.108-88-3Flam. Liq. 2; Skin Irrit. 2; Repr. 50 - 100 % EC-No.203-625-92; STOT SE 3; STOT RE 2; Index-No.601-021-00-3Asp. Tox. 1; H225, H304, H315, H336, H361d, H373 F, Xn, Repr.Cat.3, R11 - R38 - R48/20 - R63 - R65 - R67 For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16 Section4. FIRST AID MEASURES Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed Lung irritation, chest pain, pulmonary edema, Inhalation studies on toluene have demonstrated the development of inflammatory and ulcerous lesions of the penis, prepuce, and scrotum in animals. Indication of any immediate medical attention and special treatment needed no data available Section5. FIREFIGHTING MEASURES Extinguishing media Suitable extinguishing media Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special hazards arising from the substance or mixture Carbon oxides Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information Use water spray to cool unopened containers. Section6. ACCIDENTAL RELEASE MEASURES Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas. Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13). Reference to other sections For disposal see section 13. Section7. HANDLING AND STORAGE Precautions for safe handling Avoid contact with skin and eyes. Avoid inhalation of vapour or mist. Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic charge. Conditions for safe storage, including any incompatibilities Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Specific end use(s) no data available Section8. EXPOSURE CONTROLS/PERSONAL PROTECTION Control parameters Components with workplace control parameters Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it. Body Protection Complete suit protecting against chemicals, Flame retardant antistatic protective clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Section9. PHYSICAL AND CHEMICAL PROPERTIES Information on basic physical and chemical properties a) AppearanceForm: liquid b) Odourno data available c) Odour Thresholdno data available d) pHno data available e) Melting point/freezingno data available point f) Initial boiling point and no data available boiling range g) Flash point4 °C - closed cup h) Evaporation rateno data available i) Flammability (solid, gas) no data available j) Upper/lowerUpper explosion limit: 6,7 %(V) flammability orLower explosion limit: 1,4 %(V) explosive limits k) Vapour pressureno data available l) Vapour densityno data available m) Relative densityno data available n) Water solubilityno data available o) Partition coefficient: n- no data available octanol/water p) Auto-ignition536 °C temperature q) Decompositionno data available temperature r) Viscosityno data available s) Explosive propertiesno data available t) Oxidizing propertiesno data available Other safety information no data available Section10. STABILITY AND REACTIVITY Reactivity no data available Chemical stability no data available Possibility of hazardous reactions no data available Conditions to avoid Heat, flames and sparks. Extremes of temperature and direct sunlight. Incompatible materials Strong oxidizing agents Hazardous decomposition products Other decomposition products - no data available Section11. TOXICOLOGICAL INFORMATION Information on toxicological effects Acute toxicity no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitization no data available Germ cell mutagenicity no data available Carcinogenicity IARC:3 - Group 3: Not classifiable as to its carcinogenicity to humans (Toluene) Reproductive toxicity no data available Specific target organ toxicity - single exposure no data available Specific target organ toxicity - repeated exposure no data available Aspiration hazard no data available Potential health effects InhalationMay be harmful if inhaled. Causes respiratory tract irritation. Vapours may cause drowsiness and dizziness. IngestionMay be harmful if swallowed. Aspiration hazard if swallowed - can enter lungs and cause damage. SkinMay be harmful if absorbed through skin. Causes skin irritation. Signs and Symptoms of Exposure Lung irritation, chest pain, pulmonary edema, Inhalation studies on toluene have demonstrated the development of inflammatory and ulcerous lesions of the penis, prepuce, and scrotum in animals. Additional Information RTECS: Not available Section12. ECOLOGICAL INFORMATION Toxicity no data available Persistence and degradability no data available Bioaccumulative potential no data available Mobility in soil no data available Results of PBT and vPvB assessment no data available Other adverse effects Toxic to aquatic life. Section13. DISPOSAL CONSIDERATIONS Waste treatment methods Product Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product. Section14. TRANSPORT INFORMATION UN number ADR/RID: 1294IMDG: 1294IATA: 1294 UN proper shipping name ADR/RID: TOLUENE, SOLUTION IMDG: TOLUENE, SOLUTION IATA:Toluene, SOLUTION Transport hazard class(es) ADR/RID: 3IMDG: 3IATA: 3 Packaging group ADR/RID: IIIMDG: IIIATA: II Environmental hazards ADR/RID: noIMDG Marine Pollutant: noIATA: no Special precautions for user no data available SECTION 15 - REGULATORY INFORMATION N/A SECTION 16 - ADDITIONAL INFORMATION N/A |
Safety Information
| Symbol | ![]() GHS02, GHS07, GHS08 |
|---|---|
| Signal Word | Danger |
| Hazard Statements | H225-H304-H315-H336-H361d-H373 |
| Precautionary Statements | P210-P261-P281-P301 + P310-P331 |
| Personal Protective Equipment | Eyeshields;Faceshields;full-face respirator (US);Gloves;multi-purpose combination respirator cartridge (US);type ABEK (EN14387) respirator filter |
| Hazard Codes | E;Xn |
| Risk Phrases | 11-38-48/20-63-65-67-23/24/25 |
| Safety Phrases | 36/37-62-45-36/37/39-28-26-16 |
| RIDADR | UN 1993 3/PG 2 |
| WGK Germany | 3 |
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc.
We are committed to providing high-quality chemical products and comprehensive solutions to meet the diverse needs of the global market.
Our research and development team possesses profound professional knowledge and extensive industry experience, dedicated to developing cutting-edge chemical materials to drive technological progress and industrial development. Our production facilities are equipped with state-of-the-art technology and a stringent quality control system to ensure product consistency and reliability.
As a pioneer in the industry, we not only offer standardized products but also customize chemicals and services according to the specific needs of our customers. Our goal is to become a trusted partner for global customers through continuous technological innovation and superior customer service.


Our Advantage
Quality control
Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.
Technological innovation
Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.
Competitiveness
Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.
Word of mouth
Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.

Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
After-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
Our packaging and shipping
• Packaging:
1kg/bag or bottle, 25kg/drum, 50kg/drum, 200L/drum, 1T/bag or IBC drum, standard export packaging or packaging required by customers.


• Shipping

• Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Email: jiuyitime@fdachem.com
Sincerely hope to establish friendly business relationships with new and old customers, and jointly create a beautiful future for the fine chemical industry!
Company Profile Introduction
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions. With our agile custom synthesis capabilities and responsive supply chain system, our products have gained widespread adoption across Asian markets including Japan, South Korea, Singapore, and Malaysia, while also expanding deeply into Europe and the Americas. We have forged long-term strategic partnerships with numerous leading global enterprises in the sector. "Driving value through technology and earning trust through service" is our core mission. Looking ahead, we will continue to focus on technological breakthroughs and green innovation in new materials, collaborating with partners to build a high-quality industrial ecosystem and provide globally competitive solutions with greater foresight.
China



