Basic information Safety Related Supplier

ChemicalBook Product Catalog Biochemical Engineering Biochemical Reagents Fluorescence Imaging Resorufin sodium salt

1/1

Resorufin sodium salt NEW

$ 66.00 /100mg

Min. Order
PurityN/A
Cas No34994-50-8
Supply Ability10g
Update time2026-04-14

TargetMol Chemicals Inc.

TargetMol Chemicals Inc.

VIP6Y

United States

United States

show more

Enterprise Verified

Business Bank account Basic Contact Infomation Business Address Trade Company

Chemical Properties

Product Name	Resorufin sodium salt
CAS No	34994-50-8
EC-No
Min. Order
Purity	N/A
Supply Ability	10g
Release date	2026/04/14

Product Introduction

Bioactivity

Name	Resorufin sodium salt
Description	Resorufin sodium salt (NSC-12097 sodium salt) is a fluorescent pink dye.
Cell Research	1. For the detection of ROS and RNS 1. Solution preparation: Dissolve Resorufin sodium salt in an appropriate solvent (such as deionized water or PBS), usually preparing a working solution with a concentration of 0.1-10 μM. 2. Treatment: Add the solution to the cell culture medium or tissue section and incubate for a certain period of time (usually 15-120 minutes) to allow the dye to enter the cell and react with ROS/RNS. 3. Fluorescence detection: Fluorescence detection is performed by fluorescence microscopy, fluorescence spectrophotometer or flow cytometer. The excitation wavelength of Resorufin is 540 nm and the emission wavelength is 590 nm. 4. Data analysis: The concentration of ROS/RNS is proportional to the intensity of the fluorescence signal, and the change of ROS/RNS can be quantitatively evaluated by the change of the fluorescence signal intensity. 2. For the detection of biomarkers and analytes 1. Labeling reaction: Resorufin sodium salt reacts with the target biomolecule or probe to bind to the analyte. 2. Detection and analysis: Use a fluorescence microscope or spectrophotometer to perform quantitative analysis based on the change in fluorescence signal intensity after the reactant binds to the dye. III. Used for cell activity and function research 1. Cell treatment: Add Resorufin sodium salt to the cell culture medium and observe the fluorescence changes after incubation for a certain period of time. 2. Cell viability assessment: Evaluate the increase or decrease in ROS levels in cells through changes in fluorescence intensity, and then infer the physiological state of cells. IV. Application in animal models 1. Animal treatment: Inject or gavage Resorufin sodium salt into animals, or use it in in vitro tissue samples of animals. 2. Fluorescence imaging: Evaluate the changes of ROS/RNS under different experimental conditions through in vivo or in vitro imaging techniques (such as fluorescence imaging or fluorescence detection of tissue sections). The above information is based on published literature. Experimental procedures should be appropriately modified to meet specific research demands.
Storage	Shipping with blue ice/Shipping at ambient temperature.
Solubility Information	DMSO : 2.36 mg/mL (10.04 mM), Sonication is recommended.
Keywords	Resorufin sodium salt \| Resorufin sodium \| Resorufin \| NSC-12097 \| NSC12097 \| NSC 12097 sodium \| NSC 12097 \| Inhibitor \| inhibit
Inhibitors Related	Ethoxyquin \| Kaolin \| Allopurinol \| Cysteamine hydrochloride \| Ethyl linoleate \| Magnesium acetate tetrahydrate \| Inosine \| L-Cystine \| Copper Sulfate Pentahydrate \| Dimethyl itaconate \| L-Ascorbic acid sodium salt \| Dimethyl phthalate

show more

Company Profile Introduction

You may like

Recommended supplier

Send Inquriy