TRISTEARIN
Modify Date: 2024-01-11 16:05:44
 TRISTEARIN structure | Common Name | TRISTEARIN |
|---|
| CAS Number | 68334-00-9 | Molecular Weight | 891.48000 |
|---|
| Density | N/A | Boiling Point | 260ºC |
|---|
| Molecular Formula | C57H110O6 | Melting Point | 72-75ºC |
|---|
| MSDS | N/A | Flash Point | N/A |
|---|
|
|
|
|
|
|
|
|
Names
| Name | tristearin |
|---|
| Synonym | More Synonyms |
|---|
Chemical & Physical Properties
| Boiling Point | 260ºC |
|---|
| Melting Point | 72-75ºC |
|---|
| Molecular Formula | C57H110O6 |
|---|
| Molecular Weight | 891.48000 |
|---|
| Exact Mass | 890.83000 |
|---|
| PSA | 78.90000 |
|---|
| LogP | 18.76910 |
|---|
MSDS
Name:Bath Wax Material Safety Data SheetSynonym:Cottonseed oil hydrogenateCAS:68334-00-9 Section 1 - Chemical Product MSDS Name:Bath Wax Material Safety Data Sheet Synonym:Cottonseed oil hydrogenate
Section 2 - COMPOSITION, INFORMATION ON INGREDIENTSCAS#Chemical NamecontentEINECS#68334-00-9Hydrogenated Cottonseed Oil100269-804-9Hazard Symbols: None Listed. Risk Phrases: None Listed.
Section 3 - HAZARDS IDENTIFICATIONEMERGENCY OVERVIEW
Not available.
Potential Health Effects
Eye:
Contact may cause transient eye irritation.
Skin:
May cause skin sensitization, an allergic reaction, which becomes evident upon re-exposure to this material.
Ingestion:
Ingestion of large amounts may cause gastrointestinal irritation.
Expected to be a low ingestion hazard.
Inhalation:
May cause respiratory tract irritation. Low hazard for usual industrial handling.
Chronic:
No information found.
Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical aid if irritation develops or persists.
Ingestion:
Do not induce vomiting. If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid.
Inhalation:
Remove from exposure and move to fresh air immediately. Get medical aid if cough or other symptoms appear.
Notes to Physician:
Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
For small fires, use dry chemical, carbon dioxide, water spray or alcohol-resistant foam. Water or foam may cause frothing. Use water spray to cool fire-exposed containers.
Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container. Remove all sources of ignition.
Section 7 - HANDLING and STORAGE
Handling:
Use with adequate ventilation. Ground and bond containers when transferring material. Avoid contact with eyes, skin, and clothing.
Keep container tightly closed. Avoid ingestion and inhalation.
Storage:
Keep away from heat, sparks, and flame. Keep away from sources of ignition. Store in a tightly closed container. Keep from contact with oxidizing materials. Store in a cool, dry, well-ventilated area away from incompatible substances.
Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Use explosion-proof ventilation equipment. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 68334-00-9: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to minimize contact with skin.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.
Section 9 - PHYSICAL AND CHEMICAL PROPERTIES
Physical State: Solid
Color: cream
Odor: none reported
pH: Not available.
Vapor Pressure: Negligible.
Viscosity: Not applicable.
Boiling Point: 500 deg F
Freezing/Melting Point: 140 deg F
Autoignition Temperature: 680 deg F ( 360.00 deg C)
Flash Point: 620 deg F ( 326.67 deg C)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature: Not available.
Solubility in water: Insoluble in water.
Specific Gravity/Density: 0.9 @38C
Molecular Formula: Mixture
Molecular Weight: 0
Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable at room temperature in closed containers under normal storage and handling conditions.
Conditions to Avoid:
High temperatures, ignition sources, strong oxidants.
Incompatibilities with Other Materials:
Strong oxidizers.
Hazardous Decomposition Products:
Carbon monoxide, carbon dioxide.
Hazardous Polymerization: Has not been reported.
Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 68334-00-9 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
Hydrogenated Cottonseed Oil - Not listed by ACGIH, IARC, or NTP.
Section 12 - ECOLOGICAL INFORMATION
Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.
Section 14 - TRANSPORT INFORMATION
IATA
No information available.
IMO
No information available.
RID/ADR
No information available.
Section 15 - REGULATORY INFORMATION
European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: Not available.
Risk Phrases:
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 68334-00-9: No information available.
Canada
CAS# 68334-00-9 is listed on Canada's DSL List.
CAS# 68334-00-9 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 68334-00-9 is listed on the TSCA inventory. |
Company Profile
Our company is a high-tech enterprise specializing in chemical raw materials such as electronic materials, optoelectronic materials, semiconductor materials, UV monomers, silane catalysts, cosmetic raw materials, etc. The company integrates research and development, production, customized synthesis, and sales, and is committed to providing customers with high-quality chemical product solutions.
Our Company
Our Advantage
Quality control
Based on industry norms, customer requirements, and internal quality objectives, we establish clear quality standards. By monitoring the production process in real-time, we ensure that every step conforms to the predetermined quality standards.
Excellent quality is one of the cornerstones of our success. We welcome ordering samples for quality testing.
Technological innovation
Our technological innovation is reflected in the development of new materials that are at the leading edge of the industry. These materials not only possess higher performance and lower costs but also enable sustainable use within an environmentally friendly production process.
Competitiveness
Based on rich experience in material development and production, we have established a more scientific cost control system. By ensuring product quality, and through refined management and continuous process optimization, we offer more competitive prices.
Word of mouth
Adhering to the principle of customer first, customer first, and honest service, we have established long-term business relationships with customers and are deeply welcomed and trusted by them.
Rich experience
Our products have been exported to many countries, including Germany, Spain, the United Kingdom, the United States, Australia, the Middle East, Asia, and more. We have received highly positive feedback from our clients and have established long-term friendly cooperative relationships with them.
Safe and fast delivery
We will arrange shipment of spot products as soon as we receive payment.
Customized products are determined based on the synthesis time of different products.
Excellent pre-sales and after-sales service
Pre sales:
We are committed to providing the most favorable quotes and detailed information about our products and company.
After-sale service:
We assist buyers in customs clearance by providing necessary documents and information.
If there is any dispute over product quality, we are committed to providing the best solution.
Our packaging and shipping
• Packaging:
1kg/bag or bottle, 25kg/drum, 50kg/drum, 200L/drum, 1T/bag or IBC drum, standard export packaging or packaging required by customers.
• Shipping
• Delivery:
Within 7 days after receiving your payment
Contact information
For more details, pls contact us freely.
Email: jiuyitime@fdachem.com
Sincerely hope to establish friendly business relationships with new and old customers, and jointly create a beautiful future for the fine chemical industry!
China
